SKU 94121 For technical questions, please call 1-800-444-3353. Page 8
To Install The Stop Plate:
2. Insert the Release Foot Pedal (10) onto the Release Valve Spindle (5). Pump
the Lift Foot Pedal (11) until the Platform (35) of the Motorcycle Lift reaches its
maximum height. (See Figure D.)
3. Align the two mounting slots in the Stop Plate (32) with the two mounting holes
located at the rear of the Platform (35). Then secure the Stop Plate to the
Platform, using two Bolts (33), four Washers (23), and two Nuts (30). NOTE:
When adjusting the Stop Plate forward or backward, make sure to retighten the
two Nuts. (See Figure D.)
1. WARNING! As an additional safety precaution, ALWAYS insert the
Locking Bar (22) completely through the Front Lifting Arm (38) when the
Motorcycle Lift is in its raised position. (See Figure C.)
LOCKING BAR
(22)
FRONT LIFTING ARM
(38)
FIGURE C
END VIEW
FIGURE D
REV 03/06
