SKU 94121 For technical questions, please call 1-800-444-3353. Page 12
PARTS LIST - MOTORCYCLE LIFT
NOTE:
Some parts are listed and shown for illustration purposes only,
and are not available individually as replacement parts.
TROUBLESHOOTING
Problem Possible Solution
Motorcycle Lift “fades”, allowing a load to
slowly lower on its own.
1. Make sure the unit’s 1,000 pound lifting capacity is not being exceeded.
2. Make sure the air compressor’s regulator is set at 200 PSI.
3. Check all air connections for leaks.
4.
Bleeding Instructions:
Purge the system of air by fully pressing the
Release Foot Pedal (10) and pumping the Lift Foot Pedal (11) 15 to 20
times.
(See page 7.)
Check the level of hydraulic oil in the Reservoir (32P). If necessary, top off
the Reservoir with a high quality hydraulic oil of 15/40 viscosity.
(See
page 7.)
After the system has been bled, test the operations of the
Motorcycle Lift to assure its efficiency before attempting to lift a
motorcycle.
5. If the hydraulic oil level is okay, have a qualified service technician
replace the inner seals of the unit.
traPnoitpircseD.ytQtraPnoitpircseD.ytQtraPnoitpircseD.ytQ
1pmuPriA102)mm6(rehsaWkcoL3183mrAgnitfiLtnorF1
2kniL112)6M(tuN993mrA
gnitfiLraeR1
3niP122raBgnikcoL104eldnipSmrAgnitfiL1
4niP-R532)mm01(rehsaW0314)21x8M(tloB1
5eldnipsevlavesaeleR142)21x01M(tloB42
4)61M(tuN4
6kniL152)mm21(rehsaWkcoL834)mm41(rehsaW2
7niP262)21M(tuN844leehWtnorF2
8pmalC-U272gnirpS154)01x8M(wercSteS1
9eldnipSnotsi
PpmuP182gnihsuB464)03x6M(tloB1
01ladePtooFesaeleR192)56x21M(tloB474niPrettoC2
11ladePtooFtfiL103)01M(tuN2184noitcennoC1
21)07x6M
(tloB813)01M(rehsaWkcoL2194)thgiR(.yssAemarF1
31)mm6(rehsaW1223etalPpotS105)tfeL(.yssAemarF1
41.yssAkroFretsaC233)52x01M(t
loB2115doRpoTmrAgnitfiL1
51)07x21M(tloB443.yssAesiV125eldnipStnorF1
61)mm21(rehsaW853mroftalP135)03x6M(tloB4
71gnihsuB463etalPgn
idilS145)52x6M(tloB7
81.yssAwercSgnitsujdA273pmaR155esaBpmuP1
91tuN8
REV 03/06
