P-8
Initialization
1. Machine Initialization
1-1. How to initialize QT-2100 terminal
Preparation:
1. All peripheral devices and QT-2100 terminals of this cluster
should be turned off.
2. Connect all of the peripheral devices (such as printer, display
etc.) to QT-2100 terminal.
3. Connect all QT-2100 terminals by inline.
Operation:
4. Turn on all peripheral devices of a QT-2100 terminal.
5. Turn on this QT-2100 terminal with pressing the left-most
key of the top row and release the key after buzzer sounds.
6. After releasing the key, enter “2000” (U.S.)/“1000” (other
area) and press the <ST> key.
7. Enter the current date (YY/MM/DD order) and time and
press the <YES> key.
8. In ID character field, the auto-defined ID No. is shown.
We recommend that you should not change the value.
9. In this field, the check cluster No, should be set, if your check
tracking system are divided in some clusters.
(Enter cluster No. “1” ~ “9”, if you use check cluster system.)
Date 00-00-00
Time 12:34 00
ID Character MC #01
Check cluster ID 0
Check System Master
R/J/Order Printer(1) UP-350
R/J/Order Printer(2) UP-350
R/J/Order Printer(3) UP-350
Slip Printer SP-1300
OK? YES
Date 01-10-10
Time 12:34 00
ID Character MC #01
Check System Master
Check cluster ID 0
R/J/Order Printer(1) UP-350
R/J/Order Printer(2) UP-350
R/J/Order Printer(3) UP-350
Slip Printer SP-1300
OK? YES
Date 01-10-10
Time 12:34 00
ID Character MC #01
Check cluster ID 0
Check System Master
R/J/Order Printer(1) UP-350
R/J/Order Printer(2) UP-350
R/J/Order Printer(3) UP-350
Slip Printer SP-1300
OK? YES
Date 01-10-10
Time 12:34 00
ID Character MC #01
Check cluster ID 0
Check System Master
R/J/Order Printer(1) UP-350
R/J/Order Printer(2) UP-350
R/J/Order Printer(3) UP-350
Slip Printer SP-1300
OK? YES
