P-149
QT-2100 Programming Manual
5-3. Programming characters and messages
Preparation:
1. Sign on a clerk (if necessary).
2.
Press <PGM MODE> repeatedly to assign Program 2 mode.
3. Select “2. Char & Message” and press the <YES> key.
5-3-1 Programming receipt message, slip message and guest receipt message
Operation
4. Select “1. Receipt/SLIP Message” and press the <YES> key.
5. Select the appropriate record, press the <YES> key, enter
characters (Maximum 40 characters) and press the <YES>
key.
6. Press the <ESC> key to return to the previous menu.
P2
C
01 10-10-01 12:34 000000
PGM-2
1.Item Descriptor
2.Char & Message
0.00
Char & Message
Char & Message
1.Receipt/SLIP Msg
2.Text Recall
3.Order Char Link
4.Fixed Totalizer
5.Group Character
6.Special Character
7.Report Header
8.Endorse Message v
0.00
Receipt/SLIP Msg
0001-032 (Receipt Logo)
YOUR RECEIPT
0002-032 (Receipt Logo)
THANK YOU
0003-032 (Receipt Logo)
CALL AGAIN
0004-032 (Receipt Commercial)
0005-032 (Receipt Commercial)
0006-032 (Receipt Commercial)
0.00
Rec No. Message
1 ~ 4 Receipt logo message
5 ~ 8 Receipt commercial message
9 ~ 12 Receipt bottom message
13 ~ 16 Bill top message
17 ~ 20 Bill copy message
21 ~ 24 Bill bottom message
25 ~ 28 Slip logo message
29 ~ 32 Slip intermediate message
33 ~ 36 Slip bottom message
37 Not used
38 ~ 47 Guest bottom message
48 Copy receipt message
