A SERVICE OF

logo

Open as PDF
next previous
P-105
QT-2100 Programming Manual
4-2-5-12 Programming table range by range
Operation
5. Select “12. Table Range” and press the <YES> key.
6. Select an appropriate record, enter the range and press the
<YES> key.
7. After programming, press the <ESC> key to proceed to the
next step.
8. Enter the start range No. and press the <YES> key.
(It starts “0001” if you skip to enter the start range.)
Then enter the end range No. and press the <YES> key.
(It ends the last record if you skip to enter the end range.)
9. Press the <YES> key.
10. Press the <ESC> key to return to the previous menu.
Range
Operation
5.Allowed function 2^
6.Allowed function 3
7.Allowed function 4
8.Allowed function 5
9.Arrangement
10.Report
11.Commission Rate
12.Table Range
0.00
Table Range
Start Table Range 0
End Table Range 0
0.00
Table Range
Enter Start range 0
End range 0
OK? YES
0.00
Table Range
Enter Start range 1
End range 99
OK? YES
0.00