90
Auto Exposure Bracketing
With autoexposure bracketing (AEB), the camera automatically changes the exposure level up
to
+
/
–
2 stops in 1/2-stop increments for three successive shots.
In the <
> mode, AEB is executed by changing both the shutter speed and aperture.
In the <
> mode, AEB is executed by changing the aperture.
In the < >, < >, or < > mode, AEB is executed by changing the shutter speed.
Standard exposure (0) Decreased exposure (–1/2 stop) Increased exposure (+1/2 stop)
Set the AEB amount.
•
Turn the < > dial to set the desired AEB amount,
then press <
>.
s
The menu will reappear.
•
Press the < > button to exit the menu and turn
off the LCD monitor.
s
The < > and AEB level will appear on the LCD
panel.
2
On the menu, select [AEB].
•
Press the < > button.
•
Turn the < > dial to select [AEB], then press
< >.
1
AEB range
Shoot.
s
The three bracketed shots will be exposed in the
following sequence: standard exposure, decreased
exposure, and increased exposure.
s
The respective bracketing amount will be displayed
as each bracketed shot is taken.
s
The current drive mode will be used for the
bracketing. (→p.76)
s
During the AEB shooting, the < > icon and AEB
amount will blink.
•
When AEB is used with the self-timer, the three
bracketed shots will be taken in succession after
the 10-second self-timer delay.
3
standard exposure
decreased exposure
increased exposure
