124
Connect the Camera to the Printer
Connecting to a Canon BJ Printer
To connect the camera and printer with the necessary cable, refer to the manuals that came
with the printer.
Follow steps 1 to 3 in “Connecting to a
Card Photo Printer” to connect the
camera to the BJ printer. (→p.123)
1
Turn the camera’s < > switch to < >,
then press the < > button.
s
An image in the CF card will be displayed.
2
Turn on the printer.
•
Press the printer’s power button to turn it on.
s
The < > icon will appear on the camera’s LCD
monitor.
s
The < > icon will appear on the printer’s operation
panel.
3
•
To disconnect the cable from the camera and printer, follow the procedure below:
1. Turn off the camera.
2. Disconnect the cable from the printer.
3. Disconnect the cable from the camera.
•
When you disconnect the camera from the printer, the < > icon or < > icon will
disappear from the camera’s LCD monitor and the camera will return to normal
playback.
•
Even while the camera is connected to the printer, you can instantly switch to
shooting by pressing the shutter button halfway (except during actual printing).
•
When disconnecting the cable from the camera’s < > terminal, be sure to grasp
the plug instead of the cord to pull it out.
•
Do not use any cable other than the dedicated interface cable to connect the camera
and printer.
BJ printer-connected icon
To BJ printer
