54
White Balance Auto Bracketing
With just one shot, three images having a different color temperature can be recorded
simultaneously. Based on the current white balance mode’s standard color temperature, the
white balance setting can be changed from 0 to
+
/
–
3 stops in whole-stop increments. This is
called white balance bracketing. One stop is equivalent to 5 Mireds of a color conversion filter.
The bracketing sequence starts with a standard color temperature, bluish tone (decreased
compensation), and reddish tone (increased compensation). The images are assigned a file
number and recorded in the CF card.
Set the image-recording quality to any
setting except [RAW]. (→p.46)
1
On the menu, select [WB-BKT].
•
Press the < > button.
•
Turn the < > dial to select [WB-BKT], then press
<
>.
2
Set the bracketing amount.
•
Turn the < > dial to select the bracketing amount,
then press < >.
•
You can bracket the white balance up to
+
/
–
3 stops
in whole-stop increments.
s
After the setting is completed, the menu will
reappear.
•
Press the < > button to exit the menu and turn
off the LCD monitor.
s
During white balance bracketing, the icon for the
current white balance setting will blink.
s
The number of remaining shots displayed on the
LCD panel will be one-third the normal number.
3
Shoot.
s
With a single shot, three images, each having a
different color temperature, will be recorded in the
CF card.
s
The bracketing sequence will start with the standard
color temperature followed by a bluish tone
(decreased compensation) and reddish tone
(increased compensation).
•
The current drive mode is used during white
balance bracketing. (→p.76) During continuous
shooting, the number of images recorded will be
three times as many as the number of shots taken.
•
Since three images are recorded for one shot, the
CF card will take longer to record the shot.
4
Standard setting
Bracketing amount
+
/
–
1 stop
+
/
–
2 stops
+
/
–
3 steps
