CHAPTER 3. OPERATING THE CONSOLE
5. If you are going the announce the call, wait for the called party to answer.
If the called party accepts the call, press (Release).
• Caller is connected to the called party.
• Split lamp goes dark.
• Procedure complete.
If the called party declines to talk to the caller, press (Split) after the called party
hangs up.
• Console is connected to the caller again.
• Split lamp goes dark.
Explain to the caller that the called party
is not available. Take a message, or ask
the caller to try again later; then press (Release).
• Procedure complete.
6. If the called party is busy or does not answer, press (Cancel).
• Outgoing call is canceled.
• Call progress tone stops.
•
Console is connected to the caller again.
• Split lamp goes dark.
Explain to the caller that the called party cannot be reached. Take a message, or
ask the caller to try again later; then press (Release).
• Procedure complete.
7. To set up a 3-way connection, press (Split) before or after the called party answers.
•
Console, caller, and called party are connected together.
• Split lamp goes dark.
To drop out of a 3-way connection, press (Release).
• Procedure complete.
3-13
