CHAPTER 3. OPERATING THE CONSOLE
4.
If the caller wants to dial the outside number, press (Release).
• Caller hears dial tone and can now dial the outside number.
• Split lamp goes dark.
• Procedure complete.
5. If the caller wants you to complete the entire call, dial the outside number.
6. Use one of the following steps, 7 through 10, to complete the call.
7. If you are not going to announce the call, press (Release) as soon as the call starts
ringing.
• Calling party is connected to the ringing line.
• Split lamp goes dark.
• Procedure complete.
8. If you are going to announce the call, wait for the called party to answer.
If the called party accepts the call, press (Release).
• Caller is connected to the called party.
• Split lamp goes dark.
• Procedure complete.
If the called party declines to talk to the caller, press (Cancel).
• Console is connected to the caller again.
• Split lamp goes dark.
Explain to the caller that the called party is not available. Take a message, or ask the caller
to try again later; then press(Release).
• Procedure complete.
3-11
