CHAPTER 3. OPERATING THE CONSOLE
• If the DXS lamp is dark, the extension is idle; go to Step 3.
• If the DXS lamp is lighted, the extension is active; you can still place the call,
but it may wait or go to a covering party.
3. Press the DXS button for the desired extension number; observe the lamps, and
listen for call progress tone.
• The Atnd lamp at the idle call appearance button lights.
• Pos Avail lamp goes dark.
• Ringback; if call is answered, go to Step 6. If call is not answered, go to Step
7 or 8.
Ž Call waiting ringback; wait for answer, go to Step 6.
• Busy tone; go to Step 7 or 8.
• Intercept tone—unassigned number dialed; go to Step 7 or 8.
• Dial tone.
4.
Press (Start).
• Atnd lamp at idle call appearance lights.
• Pos Avail lamp goes dark.
5. Dial the desired extension number and listen for call progress tone.
• Tones same as Step 3.
6.
Talk to the called party; when the conversation is finished, press
(Release).
• Atnd lamp and the display go dark.
• Pos Avail lamp lights.
•
Procedure complete.
7. To try to call the same number again or place another call immediately, press (Cancel);
return to Step 1.
3-3
• Call progress tone stops.
•
Dial tone starts.
