8
NA
Indicator lights
Theindicatorlightsprovideimportantinformation.
This is what they can tell you:
Delayed start
IftheDELAYTIMERfunctionhasbeenactivated(see “Per-
sonalization”), after the wash cycle has been started the
indicator light corresponding to the selected delay period
will begin to flash:
Astimepasses,theremainingdelaywillbedisplayedand
the corresponding indicator light will flash:
Oncethesetdelayhaselapsed,theflashingindicatorlight
willswitchoffandtheselectedwashcyclewillbegin.
Wash cycle phase indicator lights
Oncethedesiredwashcyclehasbeenselectedandhasbe-
gun, the indicator lights switch on one by one to indicate which
phaseofthecycleiscurrentlyinprogress.
Function buttons and corresponding indicator
lights
When a function is selected, the corresponding indicator
lightwillilluminate.
If the selected function is not compatible with the program-
med wash cycle, the corresponding indicator light will flash
andthefunctionwillnotbeactivated.
If a function which is incompatible with another function
selected previously, only the most recent selection will
remainactive.
Door locked indicator light
If this indicator light is on, the appliance door is locked to
prevent it from being opened accidentally; to avoid any
damage, wait for the indicator light to switch off before you
opentheappliancedoor.
NOTE: IftheDELAYTIMERfunctionisactivated,thedoor
cannot be opened; pause the machine by pressing the
START/PAUSEbuttonifyouwishtoopenit.
!IftheSTART/PAUSEindicatorlight(orange)flashes
rapidly at the same time as the function indicator light, this
indicates a problem has occurred (see “Troubleshooting”).
Starting a wash cycle
1. SwitchthewashingmachineonbypressingtheON/OFFbutton.Allindicatorlightswillswitchonforafewseconds,then
theywillswitchoffandtheSTART/PAUSEindicatorlightwillpulse.
2.Loadthelaundryandclosethedoor.
3.SettheWASHCYCLEknobtothedesiredprogramme.
4. Set the washing temperature (see “Personalization”).
5. Set the spin speed (see “Personalization”).
6. Measure out the detergent and washing additives (see “Detergents and laundry”).
7.Selectthedesiredfunctions.
8.StartthewashcyclebypressingtheSTART/PAUSEbuttonandthecorrespondingindicatorlightwillremainlitinafixed
manner,ingreen.
Tocancelthesetwashcycle,pausethemachinebypressingtheSTART/PAUSEbuttonandselectanewcycle.
9.Attheendofthewashcyclethe
indicatorlightwillswitchon.TheDOORLOCKEDindicatorlightwillswitchoff,indi-
catingthatthedoormaybeopened.Takeoutyourlaundryandleavetheappliancedoorajartomakesurethedrumdries
completely.
SwitchthewashingmachineoffbypressingtheON/OFFbutton.
Wash
Rinse
Spin
Drain
End of wash cycle
