6
NA
Electrical
•MachineVoltage/Amperage-120V,60Hz,4Amp.
•Connection-3-prongplugwith6’cordisprovidedwith
themachine.
•Circuit/Protector-3-wiresinglephase,120V,60Hz,AC,
onaseparate15Ampcircuit.
Technical Information
Technical data
Model
ARXL129WSP
Dimensions
width:23.4””(59.5cm)
height:33.24””-33.75””(84.5-85.7cm)
depth:22””(55.9)cm
Weight
148 lbs
Minimum Installa-
tion Clearances
Sides: 0””
Front / Back: 1””
Capacity
Washing:2to15lbs.(1to7kg)
Electrical
connections
Voltage:120Volts,4A,60Hz
Water
connections
Max.Pressure:0.69MPa(6.9bar),100psi
Min.Pressure:0.05MPa(0.5bar),7.2psi
Max. Spin speed
upto1200RPM
Indesit Company offers their customers
productswiththeENERGYSTARLabel.
This appliance was tested by UL and
conformswithbothCanadianandU.S.
UL safety requirements and displays
theirMark.
•Inserttheoutletendofthedrainhoseintothestandpipe,
wallorfloordrain(Fig.6).NOTE:Theoutletendofthe
drain hose MUST be at least 20” (50 cm) above the base
ofthemachine.Nomorethan6”ofthedrainhoseshould
beinsertedintothedrainpipetopreventsiphoning.
•Useastrap,cabletie,orsimilaritemtoholdthehoseor
theU-Clampinplace.
Under Sink Method
1. Cut the blocked end of
theundersinkdrainageunit.
2. Fix the hooked end sup-
porta minimum of 620 mm
fromthefloor.
3. Use a hose clip clamp to
securely attach the grey drai-
nage hose end to the under
sink drainage unit using a
hose.clamp
20" (62 cm) min.
34" (86 cm) max.
Standpipe
"Y" Tail Piece
This connection MUST be
before drain trap and at
least 20" (50.8 cm) above
the floor where washer will
be installed.
Cable tie
Floor Standpipe w/ "Y" Branch Tail Piece
Fig. 7
20" (50 cm) min.
with an air break
25" (62 cm) min.
34" (86 cm) max.
6" max.
Standpipe
Floor Standpipe
Fig. 6
U-Clamp
