Filter
Top Products
B
Changing the Air Intake Filters
C
Cleaning the Headset Tube and Headset
1
2
3
4
5
11
1
Maintenance Maintenance
Troubleshooting
Danger
Turn off the unit and remove the Power Cord
from the electrical outlet before maintenance to
avoid electrical shock.
Pull out the two Intake Filter Panels on
the rear of the machine.
Rinse them thoroughly with warm tap
water.
Shake out water, put in a dry place and
allow to air dry.
Replace the Intake Filters.
Clean the Intake Filters once a month. If
the Oxygen Bar is used frequently, the
Intake Filters will have to be cleaned
every two weeks.
Intake Filter
Panel
In areas of high humidity,
during the use of Oxygen
concentrator, there will be
water condensation in the
condensation chamber and
headset tube. Proper
cleaning is necessary if not
used for a long period of time.
2
2
1
3
Separate the Condensation chamber and front part of headset
tube from unit, and rinse these parts with warm water and allow
the parts to air dry.
Re-attach the parts to the unit.
Oxygen Inlet
D
Cleaning the Cabinet
Wipe the cabinet with a soft, moist, clean cloth.
Do not use washing detergent, benzene, thinner or alcohol.
A : Unit does not turn on
1. Check power source and connections.
2. Check that your wall outlet is live.
3. Check that power cord is not damaged.
B: Motor runs, but no oxygen is emitted.
1. Check all hose connections.
2. Check for damaged hoses or hose kinks.
3. Check that filters are clean.
C: Limited oxygen flow
1. Check for damaged hoses or hose kinks.
2. Check voltage of wall outlet.
3. Check that filters are clean.
Oxygen InletAttach the Parts
2
3
Separate the Condensation chamber and front part of headset
tube from unit, and rinse these parts with warm water and allow
the parts to air dry.
Re-attach the parts to the unit.
10
B
Changing the Air Intake Filters
C
Cleaning the Headset Tube and Headset
1
2
3
4
5
11
1
Maintenance Maintenance
Troubleshooting
Danger
Turn off the unit and remove the Power Cord
from the electrical outlet before maintenance to
avoid electrical shock.
Pull out the two Intake Filter Panels on
the rear of the machine.
Rinse them thoroughly with warm tap
water.
Shake out water, put in a dry place and
allow to air dry.
Replace the Intake Filters.
Clean the Intake Filters once a month. If
the Oxygen Bar is used frequently, the
Intake Filters will have to be cleaned
every two weeks.
Intake Filter
Panel
During the use of Oxygen
concentrator, there will be
water condensation in the
condensation chamber
and headset tube. Proper
cleaning is necessary if not
used for a long period of
time.
2
2
1
3
Separate the Condensation chamber and front part of headset
tube from unit, and rinse these parts with warm water and allow
the parts to air dry.
Re-attach the parts to the unit.
Oxygen Inlet
D
Cleaning the Cabinet
Wipe the cabinet with a soft, moist, clean cloth.
Do not use washing detergent, benzene, thinner or alcohol.
A : Unit does not turn on
1. Check power source and connections.
2. Check that your wall outlet is live.
3. Check that power cord is not damaged.
B: Motor runs, but no oxygen is emitted.
1. Check all hose connections.
2. Check for damaged hoses or hose kinks.
3. Check that filters are clean.
C: Limited oxygen flow
1. Check for damaged hoses or hose kinks.
2. Check voltage of wall outlet.
3. Check that filters are clean.
Oxygen InletAttach the Parts
2
3
Separate the Condensation chamber and front part of headset
tube from unit, and rinse these parts with warm water and allow
the parts to air dry.
Re-attach the parts to the unit.