Filter
Top Products
7
2. Have a second person hold the Base (52) in the
position shown.
Identify the Left Upright (53) (the Right Upright
[54] has a square hole near the lower end).
Hold the Left Upright (53) so the two round
holes are on top as shown. Attach the Left
Upright to the Base (52) with two M10 x 75mm
Bolts (2) and two M10 Star Washers (9). Do not
fully tighten the Bolts yet.
Attach the Right Upright (54) to the Base (52)
in the same way.
2
52
53
2
2
9
9
54
Square
Hole
Round Holes
Round Holes
1. Make sure that the power cord is unplugged.
Position the Base (52) and the Base Extensions
(
45) upside-down as shown.
A
ttach six Base Feet (63) to the Base (52) and
the Base Extensions (45) with six M4.2 x
25.4mm Tek Screws (26).
1
52
26
26
63
6
3
63
26
63
26
63
26
4
5
63
26
4
5