Filter
Top Products
6
6. Press the Weight Tube Bumper (79) into the indi-
cated end of the Weight Tube (80).
Insert the Weight Tube (80) into the stack of
Weights (25). Slide the eighth Weight (25) onto
the upper end of the Weight Tube. The Weight
Tube must be turned so the welded pin is in the
pin groove in the Weight.
Locate the lower ends of the Weight Guides
(72)—there are holes near the upper ends. Insert
the lower ends of the Weight Guides into the
eight Weights (25).
7. Attach the upper ends of the Weight Guides (72)
to the Top Frame (67) with the 5/16” x 6” Bolt
(74), the two Weight Guide Spacers (73) and a
5/16” Nylon Lock Nut (3).
8. Press two 1 3/4” Inner Caps (44) and two 1”
Round Inner Caps (49) into the Arm Frame (52).
Apply lubricant to the upper axle on the Arm
Frame (52). Hold the axle between the two Arm
Frame Bushings (68). Set the Arm Frame
Bushings and the Arm Frame on the plate welded
to the top of the Top Frame (67). The Arm Frame
must be turned so the bracket is facing away
from the Front Upright (42). Place the Arm Frame
Bracket (69) over the Arm Frame Bushings.
Attach the Arm Frame Bracket to the Top Frame
with four 1/4” x 3/4” Screws (18) and 1/4” Nylon
Lock Nuts (7).
6
7
8
79
Pin
Groove
Welded
Tube
80
72
Upper Ends of
Weight Guides
have Holes
25
25
72
72
67
74
73
3
44
Bracket
68
67
49
49
42
69
18
7
44
52—Lubricate