Filter
Top Products
8
T
HE PRE-LUBRICATED WALKING BELT
Your treadmill features a walking belt coated with high-performance lubricant. IMPORTANT: Never apply sili-
cone spray or similar substances to the walking belt or the walking platform. Such substances will deteri-
o
rate the walking belt and cause excessive wear.
HOW TO PLUG IN THE POWER CORD
This product is for use on a dedicated, 20-amp, 220–240 volt circuit. This product must be earthed. If it
should malfunction or break down, earthing provides a path of least resistance for electric current to reduce the
risk of electric shock. This product is equipped with a power cord having an equipment-earthing conductor and an
earthing plug. IMPORTANT: If the power cord is damaged, it must be replaced with a manufacturer-recom-
mended power cord.
See drawing 1. Press the pins on the power cord into the metal clips
in the adapter as shown. Close the adapter cover over the end of the
power cord and tighten the screw in the adapter. IMPORTANT:
Make sure that the adapter cover is secure and the screw has
been tightened before using the power cord.
See drawing 2. Plug the power cord into an appropriate outlet that is
properly installed and earthed in accordance with all local codes and
ordinances.
OPERATION AND ADJUSTMENT
Metal
Clips
1
Pins
Screw
Adapter
Outlet
2
Adapter
Cover
DANGER: Improper connection of the equipment-earthing conductor can result in an in-
creased risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt as
to whether the product is properly earthed. Do not modify the plug provided with the product—if it will
not fit the outlet, have a proper outlet installed by a qualified electrician.