Filter
Top Products
9
OPERATION AND ADJUSTMENT
THE PERFORMANT LUBE
TM
WALKING BELT
Your treadmill features a walking belt coated with PERFORMANT LUBE
TM
, a high-performance lubricant. IMPOR-
TANT: Never apply silicone spray or other substances to the walking belt or the walking platform. Such
substances will deteriorate the walking belt and cause excessive wear.
HOW TO PLUG IN THE POWER CORD
This product must be earthed. If it should malfunction or break
down, earthing provides a path of least resistance for electric cur-
rent to reduce the risk of electric shock. This product is equipped
with a power cord having an equipment-earthing conductor and a
earthing plug.
Two power cords are included. Select the one that will fit your
outlet. See drawing 1. Plug the indicated end of the power cord
into the socket on the treadmill. Next, lift the tab on the ferrite
box and clamp the ferrite box around the power cord. Fasten
the included plastic tie just behind the ferrite box and cut off the
excess plastic tie. The plastic tie will prevent the ferrite box
from sliding along the power cord. See drawing 2. Plug the
power cord into an appropriate outlet that is properly installed
and earthed in accordance with all local codes and ordinances.
Important: The treadmill is not compatible with GFCI-equipped
outlets.
Important: If the power cord is damaged, it must be replaced with a
manufacturer-recommended power cord.
DANGER: Improper connection of the equipment-earthing conductor can result in an in-
creased risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt as
to whether the product is properly earthed. Do not modify the plug provided with the product—if it will
not fit the outlet, have a proper outlet installed by a qualified electrician.
Socket on treadmill
Outlet
1
2
Ferrite Box
Tab
Plastic Tie