Filter
Top Products
7
INCLINE ADJUSTMENT
The incline of the treadmill can be adjusted to any of
three angles. To change the incline, first lift the front of
the Frame (29) so the small incline knobs on the sides
of the Frame slide out of the slots in the brackets on
t
he Uprights (35, 36). Raise or lower the Frame, and
slide the knobs into one of the three sets of slots in the
brackets.
Make sure that the knobs are fully insert-
ed at the same height.
FOLDING THE TREADMILL FOR STORAGE
When the treadmill is not in use, it can be folded to
the compact storage position. CAUTION: You must
be able to safely lift 25 pounds (11 kg) to raise,
lower, or move the treadmill. Follow the steps below
to fold the treadmill.
1. Hold the tread-
mill in the loca-
tion shown.
CAUTION: To
decrease the
possibility of
injury, bend
your legs and
keep your back
straight.
As
you raise the
treadmill, make
sure to lift with
your legs
rather than your back.
Raise the treadmill to the
vertical position.
2. Hold the treadmill
securely with your
right hand as
shown. Insert the
Storage Pin (4)
into the hole in the
r
ight side of the
Right Upright (36)
and into the
Frame (29)
as far
as it will go.
Next, press the
ends of the Spring
Clip (21) together,
and slide the
Spring Clip onto
the end of the
Storage Pin (4).
LOWERING THE TREADMILL FOR USE
1. Hold the treadmill securely with your right hand as
shown in drawing 2 above. Press the ends of the
Spring Clip (21) together, and slide the Spring Clip
off the end of the Storage Pin (4). Pull out the
Storage Pin and pivot the treadmill down a few
inches. Then, reinsert the Storage Pin and reattach
the Spring Clip.
2. Hold the treadmill firmly with both hands, and lower
the treadmill to the floor.
CAUTION: To decrease
the possibility of injury, bend your legs and
keep your back straight.
29
36
4
21
CAUTION: Make sure that the
incline knobs are fully inserted at the same
height.
29
35
Bracket
36
1
2