Filter
Top Products
11
MAINTENANCE AND STORAGE
Inspect and tighten all parts of the exercise cycle reg-
ularly. The exercise cycle can be cleaned with a soft,
damp cloth. To prevent damage to the console, keep
liquids away from the console and keep the console
out of direct sunlight.
BATTERY REPLACEMENT
If the console does not function properly, the batteries
should be replaced. See assembly step 4 on page 6.
CRANK ADJUSTMENT
If the arms of the
Crank (8)
become loose,
they should be
tightened in order
to prevent exces-
sive wear.
Loosen the Hex
Crank Nuts (14)
on the left arm of
the Crank. Place
the tip of a standard screwdriver in one of the slots in
the slotted crank nut. Tap the screwdriver with a ham-
mer to turn the slotted crank nut counterclockwise
until the arms are no longer loose. Do not overtight-
en the slotted crank nut. When the slotted crank nut
is properly tightened, tighten the Hex Crank Nuts.
HOW TO REMOVE THE LEFT SIDE SHIELD
To remove
the Left Side
Shield (20),
first turn the
Left Pedal
(39) clock-
wise using an
adjustable
wrench, and
remove it.
Next, remove
the indicated
M4 x 12mm
Screw (5), the
M4 x 38mm Self-tapping Screws (13), and the M4 x
10mm Screw (18). Grip both Side Shields and gently
pull them apart. Turn the left arm of the Crank (8) to
the position shown, and carefully slide the Left Side
Shield forward and remove it.
TIGHTENING THE PEDALS
After using the exercise cycle for one week, retighten
the pedals. For best performance, the pedals must be
kept properly tightened. Check pedal tightness on a
weekly basis.
14
Slotted
Crank Nut
8
5
20
39
13
18
13
13
8