Filter
Top Products
ASSEMBLY
A
ssembly requires two persons.
S
et the treadmill in a cleared area and remove all packing materials; do not
dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is
coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the
top of the walking belt or the shipping carton. This does not affect treadmill performance. If there is lubricant on
top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.
In addition to the included hex keys , assembly requires a Phillips screwdriver , an
adjustable wrench , and wire cutters .
As you assemble your treadmill, use the drawings below to identify small parts. The number in parentheses below
each drawing is the key number of the part, from the PART LIST near the end of this manual. The number follow-
ing the parentheses is the quantity needed for assembly. Note: If a part is not in the parts bag, first check to see if
it has been pre-assembled.
To avoid damaging plastic parts, do not use power tools for assembly.
Handrail Washer (11)–2
2
3/4” Bolt (47)–4
S
tar Washer (81)–4
Washer (29)–4
3
Frame Pivot Bolt (1)–2
Wheel Bolt (35)–2
Console Back
Screw (4)–4
N
Upright Washer
(14)–6
Latch Screw (7)–2
Upright Bolt (2)–4
Nut (16)–2
Incline Leg Nut
(46)–2
Handrail Bolt (8)–4
Console Screw
(10)–4
Incline Leg Bolt (32)–2
Incline Leg
Washer (43)–4
Upright Star
Washer (9)–2
Handrail Star
Washer (5)–4
4” Bolt (120)–2
Base Pad
Screw (26)–6
6