Filter
Top Products
7
2. Slide the two Wheel Housings (62) onto the Base (52)
with the head of the
M10 x 62mm Bolts (35) on the out-
side as shown. Attach each Wheel Housing with two M6 x
58mm Bolts (6), two M6 Washers (11), and two M6 Nuts
(15).
2
52
6
11
62
15
11
6
62
35
35
15
1. Have a second person hold the Base (52) in the position
shown.
Identify the Left Upright (53) (the Right Upright [54] has a
l
arge hole near the lower end).
Hold the Left Upright (53) so the bend is in the posi-
tion shown. Insert two M10 x 58mm Bolts (2) into the
bracket on the Left Upright. Attach the Left Upright to
the Base (52) with the M10 x 58mm Bolts, two M10
Washers (14), and two M10 Nuts (16). Do not tighten
the Nuts yet.
Attach the Right Upright (54) to the Base (52) in the
same way.
52
53
54
16
1
2
16
14
14
1
4
2
Large
H
ole
Bend