Filter
Top Products
6
ASSEMBLY
T
o hire an authorized service technician to assemble the treadmill, call 1-800-445-2480.
Assembly requires two persons.
Set the treadmill in a cleared area and remove all packing materials; do not
dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking
belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to
the top of the walking belt or the shipping carton. This does not affect treadmill performance. If there is lubricant
on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.
Assembly requires the included hex key and your own Phillips screwdriver , two
adjustable wrenches , and wire cutters .
Use the drawings below to identify the assembly hardware. The number in parentheses below each drawing is
the key number of the part, from the PART LIST near the end of the manual. The number after the parentheses
shows the quantity needed for assembly.
Note: If a part is not in the parts bag, check to see if it is preat-
tached to one of the parts to be assembled. Extra hardware may be included. To avoid damaging plastic
parts, do not use power tools for assembly.
M10 x 110 Bolt (1)–2
M10 x 58mm Bolt (2)–4
M8 x 70mm Bolt (3)–4
M4.2 x 19mm
Screw (4)–4
M6 x 58mm Bolt (6)–4
M5 x 16mm
Screw (5)–2
M4.2 x 16mm
Screw (7)–6
M6 Washer
(11)–4
M8.5
Washer (13)–4
M10 Washer
(14)–6
M6 Nut (15)–4
M10 Nut (16)–4
M10 Star
Washer (9)–2
M8 Star
Washer (10)–4
M5 Star
Washer (12)–2
M4.2 x 10mm
Screw (8)–1