Filter
Top Products
3. The Console (16) requires three AA batteries; alkaline
batteriesare recommended. Insertthree batteriesinto
the battery compartment.Make sure that the batter-
Ies are oriented as shown by the markings inside
the battery compartment.
4. Holdthe Console (16) near the Handlebar (15). Insert
the console wire intothe indicatedhole in the
Handlebar.Note: The consolewire is longerthan
shown.
Attach the Console (16) to the Handlebar (15) with four
M4 x 16mm Screws (49). Be careful to avoid pinch-
Ing the console wire.
5. While another personholdsthe Handlebar (15) near
the Upright(13), insertthe consolewire down through
the UprighLAttach the Handlebarto the Uprightwith
three M8 x 15ram ButtonScrews (34) and three M8
SplitWashers (42). Be careful to avoid pinching the
console wire. Note:The consolewire islongerthan
shown.
3
4
Battedes_
t
J
16
16
Wire
Be careful to
avoid pinching
the console wire.
Be careful
to avoid
pinching the
console
wire.