Filter
Top Products
HOW TO ADJUST THE REED SWITCH
If the consoledoes not displaycorrectfeedback, the
reed switchshouldbe adjusted. In orderto adjustthe
reed switch,the leftside shield mustbe removed(see
HOW TO ADJUST THE RESISTANCE STRAP on
page 10).
With the leftside shield removed, locate the Reed
Switch (43). Turn the Crank (21) untilthe Magnet (38)
is alignedwith the Reed Switch.Loosen,butdo not
remove, the M4 x 16ram Screw (49). Slide the Reed
Switchslightlycloserto or away from the Magnet.
Retightenthe Screw. Turn the Crank for a moment.
Repeat untilthe console displayscorrectfeedback.
When the Reed Switch iscorrectlyadjusted, reattach
the leftside shield and the left pedal.
11