Filter
Top Products
8
HOW TO USE THE PURSUIT 795i
HOW TO ADJUST THE SEAT
For ef
fective
exercise, the
Seat (19) should
be at the proper
height. As you
pedal, there
should be a
slight bend in
your knees
when the pedals
are in the lowest
position. To
adjust the Seat,
first hold the
Seat and
unscrew the
Seat Knob (29).
Align one of the
holes in the
Seat Post (20) with the hole in the Frame (15). Insert
the Seat Knob into the Frame and the Seat Post, and
tighten the Seat Knob into the Frame. Caution: Make
sure to insert the Seat Knob through one of the
holes in the Seat Post; do not insert the Seat
Knob under the Seat Post.
HOW TO ADJUST THE PEDALLING RESISTANCE
To vary the
intensity of your
exercise, the
pedalling resis-
tance can be
adjusted. The
resistance is
controlled with
the Resistance
Knob (10). To
increase the
resistance, turn
the Resistance
Knob clockwise;
to decrease the
resistance, turn
the Resistance Knob counterclockwise.
HOW TO APPLY AN INFORMATION DECAL TO
THE CONSOLE
All of the infor
-
mation on the
console is printed
in English. The
included decal
sheet contains
the same infor-
mation in five
other languages.
If English is not
your language,
find the decal on
the decal sheet
that is printed in
your language.
Next, peel the
information decal
off the decal
sheet. Apply the
decal to the
console in the
location shown.
BA
TTERY INSTALLATION
Before the console can be operated, two AA
batteries must be installed. If you have not installed
batteries, see assembly step 2 on page 6.
19
20
15
29
10