Filter
Top Products
16
STORING THE WEIGHT BENCH
You can store either the Curl Post (9) or the Lat
Tower (14) on the storage tube on the right base
when you are not using them.
Before storing the weight bench, remove any
w
eights, slide the Lat Tower (14) onto the stor-
age tube, and adjust the Backrest (18) to the
highest inclined position. Note: For clarity, the
left fly arm is not shown.
To store the weight bench, first remove the Frame
Knob (37) and the Crossbar Pin (29) from the indi-
cated bracket.
Next, raise the Front Leg (2) as far as it will go.
Insert the Frame Knob (37) and the Crossbar Pin
(29) into the bracket. The Crossbar Pin will prevent
the weight bench from unfolding.
Bracket
Storage
Tube
2
14
9
37
29
8
18