Filter
Top Products
10
12. Attach the Weight Tube (24) to the Leg Lever
(8) with an M8 x 58mm Bolt (72), two M8
Washers (73), a 13mm x 11.5mm Spacer (53),
a
nd an M8 Locknut (67).
N
ext, press the Leg Lever Bumper (42) onto the
Weight Tube (24).
Apply grease to the barrel of an M10 x 54mm
Bolt Set (56).
Attach the Leg Lever (8) to the bracket on the
Front Leg (2) with the M10 x 54mm Bolt Set
(56). Make sure that the barrel of the Bolt
Set is inserted through both sides of the
bracket on the Front Leg.
12
56
72
5
6
8
24
73
73
53
42
2
B
racket
Grease
67
13. Insert a Long Pad Tube (54) into the indicated
hole in the Leg Lever (8).
Slide a Large Foam Pad (25) onto each end of
the Long Pad Tube (54). Then, press a Large
Pad Cap (46) into each Large Foam Pad.
Repeat this step with the other two Long
Pad Tubes (54).
13
46
8
25
54
54
54
25
46