Filter
Top Products
15
USING THE CURL PAD
To use the Curl Pad (20), first remove the 45mm
Square Inner Cap (38) from the Front Leg (2). Next,
insert the Curl Post (9) into the Front Leg, and tight-
en the Curl Knob (28) into the Front Leg and into
one of the adjustment holes in the Curl Post. Make
sure that the Curl Knob is in one of the holes in
the Curl Post.
Note: When you are not using the Curl Pad (20),
remove the Curl Post (9) and insert the 45mm
Square Inner Cap (38) into the Front Leg (2).
9
2
28
20
38
USING THE LAT TOWER
To use the Lat Tower (14), first remove the 45mm
S
quare Inner Cap (38) from the Front Leg (2). Next,
insert the Lat Tower into the Front Leg, and tighten
t
he Curl Knob (28) into the Front Leg and into the
hole in the Lat Tower. Make sure that the Curl
Knob is in the hole in the Lat Tower.
Next, slide the desired weights (not included) onto
the weight tubes on the Weight Carriage (15). If the
weights have large center holes, first slide a Weight
Adapter (32) onto each weight tube. Secure the
weights with the Weight Clips (69).
Note: When you are not using the Lat Tower
(14), remove it and insert the 45mm Square
Inner Cap (38) into the Front Leg (2).
Attach the Lat Bar (23) to the Cable (21) with the
Cable Clip (48).
21
23
48
14
69
69
32
32
15
Weights
38
28
2
WARNING:
Do not place
more than 130 lbs. (59 kg) on the Weight
Carriage (15).