M8 x 55mm Bolt (70)
M10 Large Washer (58)
M10 Small
Washer (6)
M8 Nylon Locknut (54)
M10 Nylon Locknut (11)
M10 x 75mm Bolt (39)
M10 x 30mm Bolt (38)
M10 x 45mm Bolt (40)
M10 x 80mm Bolt (41)
M10 x 25mm Bolt (43)
M8 x 70mm Bolt (30)
M10 x 65mm Bolt (56)
M10 x 20mm Bolt (26)
M10 x 180mm Bolt (76)
M10 x 70mm Bolt (85)
M6 Washer (81)
M8 Flat Washer (67)
M10 x 60mm Carriage Bolt (64)
M6 x 16mm Bolt (61)
M6 x 36mm Bolt (62)
M8 x 20mm Screw (50)
Refer to the drawings below to identify small parts used in assembly. The number in parentheses below each
drawing is the key number of the part, from the PART LIST in the center of this manual. Note: Some small
parts may have been pre-attached. If a part is not in the parts bag, check to see if it has been pre-
attached.
PART IDENTIFICATION CHART