Filter
Top Products
9
9. Attach the Bumper (39) to the Curl Bar (17)
with an M4 x 19mm Screw (54).
Attach the Curl Bar (17) to the Leg Lever (5)
w
ith the Pin/Tether (35). Then, attach the Tether
to the Leg Lever with an M4 x 19mm Screw
(54).
10. Attach the Curl Pad (20) to the Curl Post (6)
with two M6 x 20mm Screws (53).
9
10
17
3
9
54
5
35
54
20
6
53
11. Identify the Left Upright (11) by observing the
positions of the indicated holes. Orient one of
the Bases (9) as shown. Attach the Base to the
Left Upright with two M10 x 90mm Carriage
Bolts (43) and two M10 Nylon Locknuts (42).
Attach the Right Upright (10) to the other
Base (9) in the same way.
11
9
9
10
42
Holes
Holes
42
Warning
Decals
43
11