Filter
Top Products
16
27. Wrap the Butterfly Cable (73) around a Pulley
(43). Attach the Pulley, a Cable Trap (48), an M10
W
asher (108), and two Guards (45) to the Right
Butterfly Arm (23) with an M10 x 50mm Bolt (105)
a
nd an M10 Nylon Locknut (84). M
ake sure that
the Cable Trap is oriented to hold the Cable in
the groove of the Pulley.
28. Wrap the Butterfly Cable (73) under a “V”-pulley
(44). Attach the “V”-pulley, a Long Cable Trap
(83), an M10 Washer (108), and two Guards (45)
to the Right Upright (7) with an M10 x 150mm
Bolt (94) and an M10 Nylon Locknut (84).
Make
sure that the Cable Trap is oriented to hold
the Cable in the groove of the “V”-pulley.
27
28
84
45
45
7
94
73
83
44
84
45
45
23
73
43
105
4
8
108
29. Wrap the Butterfly Cable (73) over a Pulley (43).
Attach the Pulley to the Right Top Frame (3) with
an M10 x 40mm Bolt (104) and an M10 Nylon
Locknut (84).
30.
W
rap the Butterfly Cable (73) under a Pulley (43).
Attach the Pulley, a Cable Trap (48), and two Half
Guards (46) at the second hole from the top of
the two Pulley Plates (49) with an M10 x 50mm
Bolt (105) and an M10 Nylon Locknut (84).
Make
sure that the Cable T
rap is oriented to hold
the Cable in the groove of the Pulley
. Make
sure the Half Guards are oriented as shown.
29
84
3
43
104
73
105
46
46
84
43
48
49
49
73
30
108