Filter
Top Products
11
11. Attach the Butterfly Frame (24) to the Right Top
Frame (3) with two M10 x 65mm Bolts (87) and
an M10 Nylon Locknut (84). Do not tighten the
Bolts yet.
Attach the Butterfly Frame (24) to the Right
Upright (7) with two M10 x 35mm Screws (89).
Do not tighten the Screws yet.
10. Attach the Left Top Frame (4) to the Center
Upright (9) with two M10 x 70mm Bolts (57), two
M
10 Washers (108), and an M10 Nylon Locknut
(84).
Do not tighten the Bolts yet.
Attach the Left Top Frame (4) to the Left Upright
(8) with two M10 x 90mm Bolts (102) and two
M10 Nylon Locknuts (84). Do not tighten the
Nylon Locknuts yet.
10
4
9
8
84
108
57
102
8
4
7
11
24
84
87
89
3
30
30
12
66
68
87
5
84
108
108
Hole
12. Orient a Weight Guide (30) with the indicated
hole closer to the bottom. Attach the Weight
Guide to the Center Base (5) with an M10 x
65mm Bolt (87), two M10 Washers (108), a 1/2”
Bushing (68), and an M10 Nylon Locknut (84).
Slide a Weight Bumper (66) onto the Weight
Guide.
Attach the other Weight Guide (30) to the
Center Base (5) in the same manner.
Tighten the M10 x 70mm Bolts (57) used in
step 2.