Filter
Top Products
5
Before beginning assembly, carefully read the
following information and instructions:
•
Assembly requires two persons.
• Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until assembly is completed.
• For help identifying small parts, use the PART
IDENTIFICATION CHART. Note: Some small
parts may have been pre-attached for shipping. If
a part is not in the parts bag, check to see if it
has been pre-attached.
• Tighten all parts as you assemble them, unless
instructed to do otherwise.
• As you assemble the resistance system, make
sure all parts are oriented as shown in the draw-
ings.
The included Allen wrenches and the fol-
lowing tools (not included) are required for
assembly:
• Two adjustable wrenches
• One rubber mallet
• One standard screwdriver
• One Phillips screwdriver
• Lubricant, such as grease or petroleum jelly,
and soapy water.
Assembly will be more convenient if you have a
socket set, a set of open-end or closed-end
wrenches, or a set of ratchet wrenches.
Make Things Easier for Yourself
This manual is designed to ensure that the resist-
ance system can be assembled successfully by
most people. However, it is important to realize
that the versatile resistance system has many
parts and that the assembly process will take
time. Most people find that by setting aside plenty
of time, assembly will go smoothly.
ASSEMBLY
1
1.
Attach the Base Plate Foot (63) to the Base Plate
(1) with two M4 x 38mm Screws (100).
Before beginning assembly, make sure that
you have read and understand the informa-
tion in the box above. Refer to the PART
IDENTIFICATION CHART for help identifying
small parts.
63
100
100
1
2.
Attach a Wheel (65) to a Wheel Insert (64) with an
M10 x 78mm Button Bolt (99) and an M10 Nylon
Locknut (103).
Do not overtighten the Locknut;
the Wheel must be able to turn easily.
Attach the Wheel Insert (64) to the Base Plate (1)
with two M4 x 16mm Screws (53) and a Plastic
Foot (36).
Attach the other Wheel (65) in the same man-
ner.
2
53
64
103
1
99
65
36
65