Filter
Top Products
7
5. Attach the Lower Lat Tower (46) to the Lat Base
(48) with two M8 x 68mm Bolts (1) and two M8
Nylon Locknuts (11). Do not tighten the Nylon
Locknuts yet.
Attach the Lower Lat Tower (46) to the Crossbrace
(47) with two M8 x 68mm Bolts (1), two M8
Washers (15), and two M8 Nylon Locknuts.
Tighten all Nylon Locknuts used in steps 1–5
now.
6. Press two 60mm Square Bushings (20) into the
Weight Carriage (56). Press two 25mm Round Inner
Caps (23) into the Weight Carriage.
Press a 60mm Square Bushing (20) into the
Carriage Stop (55). The slot in the Square
Bushing must be aligned with the indicated hole
in the Carriage Stop.
7. Slide the Weight Carriage (56) onto the Upper Lat
Tower (41). The Weight Carraige must be orient-
ed as shown.
Slide the Carriage Stop (55) onto the Upper Lat
Tower (41). The 60mm Square Bushing (20) must
be facing toward the Weight Carriage (56). Attach
the Carriage Stop to the Upper Lat Tower with an
M8 x 68mm Bolt (1) and an M8 Nylon Locknut (11).
5
48
47
1
1
1
1
15
46
20
20
20
56
23
23
55
1
Align the Slot
and the Hole
6
7
20
56
55
41
11