Filter
Top Products
14. Attach the Seat (35) to the Seat Frame (44) with
two M6 x 16mm Screws (9), an M6 Washer (17),
and the M6 x 50mm Bolt (7).
15. Attach the Backrest (36) to the Backrest Brackets
(38) with four M6 x 50mm Screws (10).
16. Press a 50mm Square Inner Cap (21) into each end
of the Leg Lever (28). Press a 25mm Round Inner
Cap (23) into the Leg Lever. Press an Angled
Round Cap (29) onto the Leg Lever.
Lubricate the M10 x 78mm Bolt (5). Attach the Leg
Lever (28) to the Seat Frame (44) with the Bolt and
an M10 Nylon Locknut (12).
17. Tap 19mm Round Inner Caps (24) into each end of
the three Pad Tubes (37).
Insert a Pad Tube (37) through the indicated hole in
the Leg Lever (28). Insert another Pad Tube through
the other hole in the Leg Lever. Insert the remaining
Pad Tube through the holes in the Seat Frame (44).
Slide two Foam Pads (26) onto each Pad Tube (37).
17
14
35
44
17
7
9
10
10
36
38
12
21
23
44
15
16
10
28
21
24
26
26
26
37
37
28
44
29
5
Lubricate
37
26