Filter
Top Products
9
4. Have a second person hold the console assembly
near the Uprights (73, 74).
C
onnect the Upright Wire Harness (75) to the
Console Wire Harness (71). Make sure to con-
n
ect the connectors properly (see the inset
drawing). The connectors should slide to-
gether easily and snap into place. If they do
not, turn one connector and try again. IF THE
CONNECTORS ARE NOT CONNECTED
PROPERLY, THE CONSOLE MAY BE DAM-
AGED WHEN THE POWER IS TURNED ON.
71
Console
Assembly
4
75
74
5. Connect the TV Cable (49) and the AV Cable
(97) to the cables extending from the console
assembly. Then, insert the connectors down into
the Uprights (73, 74).
Next, insert the brackets on the Handrails (99)
into the Right Upright (74) and the Left Upright
(73). Make sure that no wires are pinched.
49
73
97
5
74
99
6. Finger tighten three Handrail Bolts (64) with
three Star Washers (90) into the Right Upright
(74). Next, finger tighten three Handrail Bolts
with three Star Washers (not shown) into the
Left Upright (73). Then, firmly tighten the six
Handrail Bolts.
73
74
64
64
90
90
75
6
73
99
71