Weider 160xtb Treadmill User Manual


 
10
9. Note the location of the 75 ohm terminal and the
audio/video input jack on the treadmill. For the
television to operate, the included Audio/Video
Wire Harness (115) and your DVD player or VCR
must be connected to the audio/video input jack
on the treadmill or a CATV cable must be con-
nected to the 75 ohm terminal (see page 11).
9
10. Make sure that all parts are properly tightened before you use the treadmill. Keep the included hex key
in a secure place; the hex key is used to adjust the walking belt (see page 27). To protect the floor or car-
pet from damage, place a mat under the treadmill.
75 Ohm
Terminal
7. Slide the Right Upright Sleeve (96) up against
the console assembly. Attach the Right Upright
Sleeve with two 3/4" Screws (4).
Attach the Left Upright Sleeve (not shown) to the
L
eft Upright (73) as described above.
73
74
4
96
4
7
Audio/
Video
Input
115
8. With the help of a second person, raise the front
of the treadmill and insert the crossbar on the
Base (83) into the cutout in the cardboard stand
as shown. Have a second person hold the
treadmill to prevent it from moving forward
or backward.
Firmly tighten the four Upright Bolts (72). With
the help of a second person, lower the treadmill
off the cardboard stand.
Cardboard
Stand
72
83
72
8