Vision Fitness T8400HRC Treadmill User Manual


 
SPECIAL CONSOLE FEATURES
Manual Start
If you wish to skip all programming steps, simply press START, and the treadmill will start in Manual
Profile mode, P1, at the speed of 1 MPH. To change speeds, press the UP or DOWN arrow.
Easy Start
Each Profile has a ‘default’ Level. If a Profile Level is not entered, then the Profile will operate on Level
1. If you choose to use the default Level of 1 and the preset profile times, you can press the START but-
ton immediately after selecting the Profile and the workout will begin.
OR, if you choose to use the preset profile time, but want to customize only the Level, you can press the
START button immediately after selecting the Level and the Profile will begin with your selected Level.
Change Difficulty
Once your workout has begun, you can vary the level of each segment by using the UP or DOWN
SPEED arrow. This feature allows you to adjust select sections of a course to meet your present fitness
level.
If you wish to vary the Level of the entire Profile, you must stop the Profile you are in and start over.
You can also change the difficulty at any time by changing the elevation using the UP or DOWN ELEVA-
TION arrows (T8200) or the toggle switch (T8100).
Pause
You may stop a Program after it has begun by pressing the STOP button once. When console is in
pause mode, ‘Pause’ will display in the LED windows. To resume the Program, press the START button.
Reset
After a Program has begun, you may quit the Program by pressing and holding the STOP button for 3
seconds. The console will fully reset.
25
PART 3
T8200/T8100 Console