Filter
Top Products
ASSEMBLY - T8200/T8100
The Vision Fitness T8200/T8100 Treadmills comes preassembled. Please follow the instructions below
for proper unboxing and initial testing. It is recommended, when possible, that the treadmill be unboxed
and initially tested by an authorized Vision Fitness dealer. If you have any questions regarding any part or
function of your treadmill, contact your dealer.
ATTACH DECK LOCKING KNOB
Remove the deck locking knob from the parts box, and thread it into the left side support. By twisting this
knob the locking pin will engage the deck.
ATTACH FRAME STABILIZER
Thread the rubber based foot into the frame stabilizer, so that the rubber side will rest on the floor. Attach
the frame stabilizer to the frame using the enclosed 5mm allen wrench and bolt.
ASSEMBLY - T8500/T8400
See assembly instructions included with your Vision Fitness T8500/T8400 treadmill.
10
PART 2
Assembly