Filter
Top Products
Removal & Replacement 600
Remove Brake
Step 1.
Remove screw holding the nagnet
Brake bracket located under the rear
Brake with Phillips head screw driver.
Step 2.
Disconnect electrical terminal at
Brake.
Step 3.
Disconnect electrical terminal from
The console set at the control box
Located above the brake.
Copyright 2001 True Fitness Technology, Inc.
Page 40
Step 2. Disconnect Electrical Terminal at Brake.
Step 1. Brake Bracket Removal.
Step 3. Disconnect Cable from Control Box.
Tools Required:
Philli
p
s Screw Drive
r