Filter
Top Products
Symptom Probable Cause Corrective Action Recommended Tools
TREADBELT
STOPS
DURING
WORKOUT
Error Code
displays:
Go to page 3 &
Page 4.
Loose safety key
connection
Belt movement issue
Worn Deck / Belt
Occurs when making
changes to speed or
elevation
Overloaded house
circuit
Continuity,
connection to motor
Tread belt not
centered or
obstructed
• Check safety key to ensure that it is
seating properly.
• Check connection sensitivity.
--------
• If treadmill will not reset with cycling
the power go to NO BELT
MOVEMENT (pages 5 & 6)
--------
• Perform Belt / Deck Wear Test
(page 21).
• Perform Amp Draw Test (page 17).
• Apply silicone.
• Replace Deck and Belt.
--------
• May be related to electro static
discharge. Contact Technical support
for assistance.
--------
• Verify the treadmill is on a dedicated
circuit with at least a 15 amp breaker
• Have customer supply a dedicated
circuit
--------
• Reconnect or replace motor wires or
connectors
--------
• Tension tread belt (page 19)
• Center tread belt
• Remove obstruction
Liquid silicone
single use pack
Liquid silicone
Applicator
Multi-meter
Socket set
Note:
All trouble
shooting should
be performed in
calibration
mode.
Page 14
Support Services 800-883-8783 Mon-Fri 8:30am-5:00pm Central Time Zone Fax: 636-272-7148
Page 7