Filter
Top Products
Symptom Probable Cause Corrective Action Recommended Tools
SPEED
FLUCTUATION
E2: CAL
Speed Fluctuation
(Due to high friction)
Speed Fluctuation
(Due to Voltage
fluctuation)
Bad Data Feedback
Incorrect Speed
Sensor Gap
• Perform Push Off Test (page 21)
• Perform Amp Draw Test (page 17)
--------
• Check Line voltage for fluctuations.
• Have customer take corrective action.
--------
• Verify tach feedback accuracy through
out the speed range.
• If inaccurate perform speed sensor test
(page 18)
--------
• Verify correct Speed sensor Gap.
• Gap should be equal to the thickness of
(3) credit cards pressed together
(approximately 1/8 to ¼ inch)
------
Multi-meter
Socket Set
Silicone Lubrication
Packet
Silicone Lubrication
Applicator
Note: All
trouble shooting
shou
ld be
performed in
C
alibration
M
ode
:
See
Page 14
Support Services 800-883-8783 Mon-Fri 8:30am-5:00pm Central Time Zone Fax: 636-272-7148
Page 10