Filter
Top Products
8 REV 1.1 - U8006182
ENGLISH
8
8 TOPCOM HB 4F00
9 CHRONOGRAPH MODE
In normal time mode:
• 2 x S2: To toggle to chronograph mode.
• S3: Start chrono.
• S3: Stop / Pause chono.
• S4: Freeze display (split time)
• [S4] Reset the chrono (Only when chono is stopped).
10 COUNTDOWN MODE
To set the countdown time:
• 3 x S2: To toggle to countdown mode.
• [S2]: Seconds will blink.
• S3 or S4: Adjust seconds up or down.
• [S3] or [S4]: Adjust seconds quickly.
• S2: Confirm. Minutes will blink.
• S3 or S4: Adjust minutes up or down.
• [S3] or [S4]: Adjust minutes quickly.
• S2: Confirm. Hour will blink.
• S3 or S4: Adjust hour up or down.
• [S3] or [S4]: Adjust hour quickly.
• [S2]: To confirm the the count down time.
To start the count down:
• S3: Start the counting.
• S3: Stop / Pause the counting. S4 to reset the counting timer (when
it’s stopped or paused).
The chronograph counts up to 99 hours, 59 minutes and 59
seconds.
The maximum counting down time is 99 hours, 59 and minutes 59
seconds. The initial setting of the timer is 1 minute.
During the last 5 seconds the watch will beep once per second, and
10 seconds when it reach zero.
When the timer is counted to zero, it will automatically reload the
preset value.
HB 4F00.book Page 8 Monday, March 17, 2008 5:01 PM