Filter
Top Products
HARD WOOD LEGS FOR TABLE/TRIPOD/CHAIR, 23.5"
Made of hard wood (not sure what kind but they weigh
11oz. ea.), 23-1/2" long with 1/4" thread on the top and
1-1/2" brass furl on the bottom. Top diameter is 1-
1/4". Leg tapers to 3/4". Not sure what these were
originally made for, but you can get creative at our
prices, and we've got lots. Price is for a set of 4.
M2194 $7.50
CLEAR ACRYLIC PLATE - 3" X 5", 1/4" THICK
Precut standard-sized rectangular clear acrylic plates
for your experimenting, hobby, or optical use. Non-pol-
ished edges.
M2206 $0.50 or 10 for $4.00
PARAMOUNT PICTURES 3-D PROJECTION SYSTEM
A superb find for the vintage 3-D enthusiast!!! The
Paramount 3-D Projection system works with the flat
projection lens of movie theatre projectors to produce
a more panoramic and 3-D projected image (same width
with 20% decreased height) of movies made for 3-D.
Anamorphic lenses are not needed and should not be
used. The system mounts on the front of the projec-
tion lens, and modifies the image via the internal multiple front surface mir-
ror assembly. These 3-D conversion systems were apparently produced by
Paramount for movie theater usage during the Cinemascope era and we were
told they were used with Friday the 13th part 3 in 3-D and the Jaws 3-D
movie. This is the more modern system that uses polarization instead of
the two color system used back in the 50's. The system is contained in a
portable 24" wide x 12 1/4" high x 12" deep black textured vinyl-covered
wooden box with handle, dual latches, and reinforced corners. The foam-
insulated interior contains the system components: lens holder, assembly
mounting plate, 2 assembly support rails, the projection unit with polarizer
set, aperture plates, two Allen wrenches, hardware bag with Allen bolts and
locking knobs, and system instruction manual. Aluminum construction.
Lightly used. Mirror assembly is in mint condition. This is an incredible buy
at our price as we understand they cost Paramount $1000.00 each. We think
you may be able to use your camera to photograph thru it(slides?)and then
attach it to your slide projector (we haven't tried that idea)or make a stereo
print for use in your old stereo viewer (we tried it with a digital camera and
it works great). How about make you own 3-D movies? We know you'll get
creative with this one. Get two? One for your camera and one for projection.
M2234 $75.00
Miscellaneous - Page 93
Surplus Shed – www.SurplusShed.com