Filter
Top Products
2000RPM TAPE DRIVE MOTOR
Nippon Audio Motor Model #NAM-3A. 13.2VDC input.
2000RPM. Our understanding is that this was designed
for use in a tape drive. 1-5/8" diameter by 1-3/4" long.
Has 5-1/2" long 3 wire leads. Unused.
M2028P $2.25
AIRPAX 12V STEPPER MOTOR
Made by Airpax for Digital. Digital part number 70-
18658-00. Airpax #S-A83709-M4. 12V, 0.4A. Has 6
leads, 3-1/2" long with connector. Shaft is 1/4" diame-
ter with a 1/2" worm type shaft over it. Total shaft
length is 1-1/2". Has plate attached with mounting
holes. Unused in original box.
M2038P $4.50
GRAB BAG OF 12 HOBBY SIZE MOTORS
Here's a mix of motors that are perfect for experimenters, students, hob-
byists, and entrepreneurs. Some will run on as low as 1VDC and some run
off standard 115VAC. If you find one that you can use in your newly creat-
ed product, we can supply you with the quantities you need.
M2043P $15.00
BEAU TORQUE MOTOR MODEL 30T38
Made by Beau Motor Div. of UMC Electronics. Model
30T38. 95 volts, 60 Hz, single phase, 25 watts, 950
RPM. We believe these were made to be used in video
tape recorders. 3" diameter by 2.8" long and a 1" long
shaft. Unused.
M2064P $5.00
1 RPM, 115VAC MOTOR WITH GEAR
Made by Singer Controls Co of America, model 414-
287-20. One revolution per minute, CCW. Works off
115VAC 60 Hz, 3 W. 1-7/8" diameter by 3/4" thick.
Has 20" long wires.
M2089P $4.50 or 10 for $35.00
Page 104 - Motors
To Order, call toll free: 1-877-7SURPLUS