Filter
Top Products
LASER POLYGON GOLD MIRROR/MOTOR ASSY
Made by Toshiba, Model LSM-205-8BK. Motor is
24VDC and revolves at 4749 RPM. 8 flat gold coated
mirrors revolve. Each rectangular mirror is 27mm long
by 5mm wide. These were made to be used in laser
scanner assemblies. Flange is 100mm diameter with 3
mounting holes. Unit is 50mm high. Unused.
L3361 $10.00
DCX EYE INSPECTION MIRROR!!
Looks like these were 25mm diameter double convex
lenses (4.5 diopter curve on each side) and aluminized
on one side. Reflections on one side all look small, but
on the other side, the focal length is perfect for
inspecting your eye. Not sure what it was designed for
but clever idea and great for fun and education.
L3477 $4.25
40MM DIA CONCAVE ALUMINUM MIRROR NEW/UNUSED
These are great unused polished aluminum mirrors that
were probably made to be used in conjunction with a
bulb for maximum light reflection. Focal length is very
short (roughly 35mm) and the dish is 6mm deep. These
are very similar to our L3262 which sold out very quick-
ly! When put up close to your eye, you get a highly
magnified view. Buy a quantity and $ave!
L3588 $2.00 or 10 for $15.00
Miscellaneous
2" RUBBER EYEGUARD?
Made for the government and called "Eyeshield
Assembly'. Will fit over 2" eyepieces. Has a threaded
insert 1-3/4" ID by 2-1/4" OD that is removable.
However, the eye end opening is only 3/4" diameter.
You'll probably want to use an exacto knife or other
sharp blade to cut that end opening larger. The inter-
esting thing about this is that there are rubber flaps
that will protect your eyepiece from dust etc. When you press the eye-
guard against your eye, the flaps open, exposing your eyepiece. We have
been told that this is the eyeguard for the AN/TVS-2 series night vision
sights. The flaps are to keep the light from the image intensifier from
lighting up your face for the enemy to see with their night vision sight.
Unused
M1184 $4.00 or 10 for $30.00
Page 84 - Miscellaneous
To Order, call toll free: 1-877-7SURPLUS