SMALL DC MOTOR, 3950 RPM, PK OF 6
Low cost motor to power toys, models, etc. Operates
on any DC voltage from 1 to 5 volts. Works well with
flashlight battery. 3950 RPM. 5gr-cm load. KKK
brand, Japan. Well built with spring steel brushes,
fiber washers and brass bushings. 4" color coded lead.
7/8" diameter by 7/8" long. Shaft is 1/8" long. These
have been in storage for years, so may need a drop of
oil. Unused. Package of 6
M2002P $5.00
12VDC CANON CASSETTE MOTOR
Model MD39-R5CN-F. Nice motor that runs off
12VDC. Made to go into cassette machines. Has 7"
long two wire cord. Unused.
M2009P $2.50 or 10 for $20.00
PANCAKE STEPPER MOTOR
Appears to be 50 steps per revolution. 1-3/4" diame-
ter by only 3/8" thick. Has 3" long 5 wire lead with 6
prong end plug. Has 6/32 threaded shaft 1/2" long.
Has two mounting ears, 3-3/16" distance between the
two. We are told that this is a great motor for robot-
ics applications but we don't have any additional specs.
On the back of the motor is the numbers 6001336 and
SI-3420, Japan. Unused.
M2015P $3.25
QUALITY MABUCHI HOBBY MOTOR
This is perfect for toys, robotics, solar power demos,
and science projects. High quality model RF-500T-
10750 by Mabuchi. Marked 5.9VDC, 10ma, but will run
on 1.5v battery and on voltages up to at least 9VDC.
These are low inertia, low current drain motors that
are perfect for solar applications. One ad we saw indi-
cates that they will run one month on a single "D" cell.
Very versatile motor as we have seen claims that it will run on 0.5 volts up
to 12 volts. We have large quantities of these so build them into your prod
-
uct and we'll supply them. Unused.
M2022P $0.99 or 10 for $6.00
Motors - Page 103
Surplus Shed – www.SurplusShed.com