Filter
Top Products
Page 13
ASSEMBLE UPRIGHTS:
1. Take the (4) uprights and slide the onto the correct post sleeve. See images below. Note: the (2)
fixed feet go onto the sleeved weldment with the handle grips. The adjustable feet go in the back. All
mounting holes are to the outside of the user area.
2. Take (20) m10 washers (PN:731-2419) and (20) m10 x 25 Hex Head bolts (PN:731-2333). NOTE:
Remember to use thread locker.
3. Using a 17mm box wrench install and tighten all (20) fasteners as shown below.
Fixed
Fixed
Adjustable
Adjustable