Filter
Top Products
12 STAR TRAC E-ST STEPPER OWNER’S MANUAL
3. Install the Display Assembly
(a) Take upper display to the front of the Stepper. Feed the cables
from the lower neck through the upper neck.
Take care not to damage the display or handlebar on the ground.
Note: This step may require two people.
(b) Keep hold of the cables and rotate the display up. Now slide the
neck over the two mount in the lower neck, take special care not to
pinch the cables or your finger when the two pieces come together.
(c) Thread in (4) M6 x 16 Flat Head Screws in the front and back of
the neck where the two pieces came together. Us a 5/32 hex key to
tighten the screws to 60 lb-in (6.7 N-m) of torque.
(d) 1st Slide handrail on to upper display mount . Rotate until bottom
of handrail is near lower frame. 2nd With some force lift handrail
until opening at the bottom of the handrail is able to slide over lower
frame.
1
ST
2
ND